CLI Guide

--embscsiraidchb
Valid Arguments raid, scsi
Description
Sets the second channel on an embedded RAID controller to SCSI or
RAID. This option is only valid for systems that support RAID/RAID
and RAID/SCSI settings for channels A and B. This option can be
replicated.
Example:
A:>syscfg --embscsiraidchb=raid
embscsiraidchb=raid
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embscsiraidchb
Valid Arguments
raid, scsi
Description
Sets the second channel on an embedded RAID controller to SCSI or
RAID. This option is only valid for systems that support RAID/RAID
and RAID/SCSI settings for channels A and B. This option can be
replicated.
Example:
A:>syscfg --embscsiraidchb=raid
embscsiraidchb=raid
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embsdcardredundancy
Valid Arguments
mirrormode, disable
Description
Sets the redundancy to mirrormode or disabled.
If set to mirrormode, read-write operation occurs on both the secure
digital (SD) cards. If one of the SD cards fails and is replaced, on
booting, the data is copied to that SD card.
If set to disable, read-write operation occurs only on SD card 1.
On Blade systems, disable the vflash key to configure this option.
Example:
A:>syscfg --embsdcardredundancy=mirrormode
embsdcardredundancy=mirrormode
Applicable Systems
This option is degraded.
115