CLI Guide

Table 7. DTKTORACADM Command on Windows Operating System
Valid Arguments dtktoracadm.exe or dtktoracadm.exe windows_scripts.lst
debug
Description On systems running Windows operating system, run the command, where
windows_scripts.lst is the input file which contains the list of path to run the
RACADM scripts and debug is an option which list the file status.
Applicable Systems
All PowerEdge 12 and later systems.
Table 8. DTKTORACADM Command on Linux Operating System
Valid Arguments python dtktoracadm.py or python dtktoracadm.py
linux_scripts.lst debug
Description On the system running Linux operating system, in the prompt type the
command, where linux_scripts.lst is the input which contains the list of path
to run the RACADM scripts and debug is an option which list the file status.
Applicable Systems
All PowerEdge 12 and later systems.
The set of converted commands are available in dtktoracadm_dict.map. For more information see, Dell
OpenManage Deployment Toolkit User's Guide or Dell OpenManage Deployment Toolkit Installation
Guide. The following table lists the set of commands available:
Table 9. SYSCFG equivalent RACADM commands
Group SYSCFG Commands Equivalent RACADM Commands
iDRAC Settings
lcp --dnsdhcp iDRAC.IPv4.DNSFromDHCP
lcp --domainname iDRAC.NIC.DNSDomainName
lcp --dnsracname iDRAC.NIC.DNSRacName
lcp --dnsregisterrac iDRAC.NIC.DNSRegister
--idractype iDRAC.Info.Type -z legacy
--autoneg iDRAC.NIC.Autoneg
--gateway iDRAC.IPv4.Gateway
--ipaddress iDRAC.IPv4.Address
--macaddress iDRAC.NIC.MACAddres
--nicselectionfailover iDRAC.NIC.Failover
--subnetmask iDRAC.IPv4.Netmask
--vlanid iDRAC.NIC.VLanID
--dnsserver1v6 get iDRAC.IPv6.DNS1
--dnsserver2v6 get iDRAC.IPv6.DNS2
--gatewayv6 iDRAC.IPv6.Gateway
--ipv6address1 iDRAC.IPv6.Address1
--ipv6address2 iDRAC.IPv6.Address2
108