CLI Guide

Table 198. IntelTxt or inteltxt (continued)
Example:
A:>syscfg --inteltxt=enable
inteltxt=enable
NOTE: To enable the Intel TXT option in a supported processor, make sure that
the:
● Virtualization technology in Processor setting is enabled.
● TPM module is installed and initialed as OK by BIOS.
● TPM security in System security is set to on with pre-boot measurements.
● User password is not set.
NmiButton or nmibutton
Table 199. NmiButton or nmibutton
Valid Arguments
● On systems prior to YX2X: enable, disable
● On YX2X and later systems: Enabled, Disabled
Description
Enables or disables the Non-Maskable Interrupt (NMI) button on the front panel. The
NMI button can be used to alert the operating system in certain cases.
NOTE: This option configures Baseboard Management Controller (BMC) and
Remote Access Controller (RAC) settings.
Example:
A:>syscfg --nmibutton=enable
nmibutton=enable
PasswordStatus or pwdlock
Table 200. PasswordStatus or pwdlock
Valid Arguments
● On systems prior to YX2X: lock, unlock
● On YX2X and later systems: Locked, Unlocked
Description
Locks the system password. To prevent the system password from being modified,
set this option to lockedand enable setup password. This field also prevents the
system password from being disabled by the user while the system boots.
Example:
A:>syscfg --pwdlock=lock
pwdlock=lock
92 SYSCFG