CLI Guide

Table 191. SysProfile or profile (continued)
NOTE: On systems prior to Dell’s 12th generation PowerEdge systems,
profile is a sub-option of power.
Example:
A:>syscfg --profile=maxperformance
profile=maxperformance
EnergyEfficientTurbo
Table 192. EnergyEfficientTurbo
Valid Arguments
● On systems prior to Dell’s YX3X systems: NA
● On Dell’s YX3X and later systems: Enabled, Disabled
Description
Enables or disables the Energy Efficient Turbo (EET). EET is a mode of operation
where the core frequency of a processor is adjusted within the turbo range based on
workload.
Example:
A:>syscfg --EnergyEfficientTurbo=Enabled
EnergyEfficientTurbo=Enabled
--Proc n TurboCoreNum
Valid Arguments
● On systems prior to 13G: NA
● On 13G and later systems: All, 1, 2, 4, 6, 8, 10, 12, 14, 16, 18
Description
Sets the number of Turbo Boost-enabled cores for a processor. By default, the
maximum number of cores per processor is enabled.
NOTE: The value of n in ProcnTurboCoreNum can be 0–3.
Example:
A:>syscfg --Proc1TurboCoreNum=6
Proc1TurboCoreNum=6
Applicable Systems PowerEdge 13G and later systems
EnergyPerformanceBias
Table 193. EnergyPerformanceBias
Valid Arguments
● On systems prior to Dell’s YX3X systems: NA
● On Dell’s YX3X and later systems: MaxPower, BalancedPerformance,
BalancedEfficiency, LowPower
Description
Sets the Energy Efficient Policy. The CPU uses this setting to control the internal
behavior of the processor and to determine whether to target higher performance or
better power savings.
SYSCFG 89