CLI Guide

Table 185. MonitorMwait (continued)
Description
Enables or disables Monitor/Mwait instructions. You can disable Monitor/Mwait only
when C state is disabled in Custom mode.
Example:
A:>syscfg --MonitorMwait=Enabled
MonitorMwait=Enabled
PowerSaver
Table 186. PowerSaver
Valid Arguments
● On systems prior to Dell’s YX3X systems: NA
● On Dell’s YX3X and later systems: Enabled, Disabled
Description
Enables or disables the power-saving Dell Active Power Controller (DAPC) algorithm.
Example:
A:>syscfg --PowerSaver=Enabled
PowerSaver=Enabled
ProcC1E or cpucle
Table 187. ProcC1E or cpucle
Valid Arguments
● On systems prior to Dell’s YX2X systems: enable, disable
● On Dell’s YX2X systems and later systems: Enabled, Disabled
Description
Enables or disables C1-E. By default, it is enabled. This option can be replicated.
Example:
A:>syscfg --cpucle=enable
cpucle=enable
ProcCStates or cstates
Table 188. ProcCStates /or cstates
Valid Arguments
● On systems prior to Dell’s YX2X systems
: enable, disable
● On Dell’s YX2X and later systems
: Enabled, Disabled
SYSCFG 87