CLI Guide

RedirAfterBoot
Table 169. RedirAfterBoot
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Enabled, Disabled
Description
Sets the BIOS console redirection to enable or disable when the operating system is
loaded.
Example:
A:>syscfg --RedirAfterBoot=Enabled
RedirAfterBoot=Enabled
SerialComm or serialcomm
Table 170. SerialComm or serialcomm
Valid Arguments
● On systems prior to Dell’s YX2X systems: on, com1cr, com2cr, off
● On Dell’s YX2X and later systems: OnNoConRedir, OnConRedirCom1,
OnConRedirCom2, Off
Description Enables or disables the serial communication devices (Serial Device 1 and Serial
Device 2) in BIOS.
Example:
A:>syscfg --SerialComm=OnNoConRedir
SerialComm=OnNoConRedir
SerialPortAddress or serialportaddrsel
Table 171. SerialPortAddress or serialportaddrsel
Valid Arguments
● On systems prior to Dell’s YX2X systems: default, alternate
● On Dell’s YX2X and later systems: Serial1Com1Serial2Com2,
Serial1Com2Serial2Com1, Com1, Com2
Description
Sets the port address of the serial devices.
On systems prior to Dell’s YX2X systems, when this option is default, Serial Device 1
is set to COM port 1 and Serial Device 2 is set to COM port 2.
On systems prior to Dell’s YX2X systems, when this option is alternate, Serial Device
1 is set to COM port 2 and Serial Device 2 is set to COM port 1.
This option can be replicated.
Example:
A:>syscfg --serialportaddrsel=default
serialportaddrsel=default
Slot Disablement
You can manage the slot disablement settings using the options in this group.
82
SYSCFG