CLI Guide

Table 155. SataPortHDriveType (continued)
Example:
A:>syscfg --SataPortHDriveType
SataPortHModel
Table 156. SataPortHModel
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortHModel
SataPortI or sata7
Table 157. SataPortI or sata7
Valid Arguments
● On systems prior to Dell’s YX2X systems: auto, off
● On Dell’s YX2X and later systems: Off, Auto
Description
Turns the SATA port 7 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata7=auto
sata7=auto
SataPortICapacity
Table 158. SataPortICapacity
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the total capacity of a hard disk drive. This option is undefined for
removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortICapacity
SataPortIDriveType
Table 159. SataPortIDriveType
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
78 SYSCFG