CLI Guide

SataPortGModel
Table 152. SataPortGModel
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortGModel
SataPortH or sata7
Table 153. SataPortH or sata7
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: auto, off
● On Dell’s 12th generation PowerEdge and later systems: Off, Auto
Description
Turns the SATA port 7 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata7=auto
sata7=auto
Applicable Systems All PowerEdge systems.
SataPortHCapacity
Table 154. SataPortHCapacity
Valid Arguments
● On systems prior to YX2X: NA
● On YX2X and later systems: read-only
Description
Displays the total capacity of a hard-disk drive. This option is undefined for
removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortHCapacity
SataPortHDriveType
Table 155. SataPortHDriveType
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
This option indicates type of device attached to this SATA port.
SYSCFG 77