CLI Guide

Table 144. SataPortEModel (continued)
● On Dell’s YX2X and later systems: Read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortEModel
SataPortF or sata5
Table 145. SataPortF or sata5
Valid Arguments
● On systems prior to Dell’s YX2X systems: auto, off
● On Dell’s YX2X and later systems: Off, Auto
Description
Turns the SATA port 5 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata5=auto
sata5=auto
SataPortFCapacity
Table 146. SataPortFCapacity
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the total capacity of a hard disk drive. This option is undefined for
removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortFCapacity
SataPortFDriveType
Table 147. SataPortFDriveType
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortFDriveType
SYSCFG 75