CLI Guide

Table 140. SataPortDModel (continued)
Example:
A:>syscfg --SataPortDModel
SataPortE or sata4
Table 141. SataPortE or sata4
Valid Arguments
● On systems prior to Dell’s YX2X systems: auto, off
● On Dell’s YX2X and later systems: Off, Auto
Description
Turns the SATA port 4 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata4=auto
sata4=auto
SataPortECapacity
Table 142. SataPortECapacity
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the total capacity of a hard disk drive. This option is undefined for
removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortECapacity
SataPortEDriveType
Table 143. SataPortEDriveType
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortEDriveType
SataPortEModel
Table 144. SataPortEModel
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
74 SYSCFG