CLI Guide

Table 137. SataPortD or sata3 (continued)
● On Dell’s YX2X and later systems: Auto, Off
Description
Turns the SATA port 3 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata3=auto
sata3=auto
Description
Turns the SATA port 3 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata3=auto
sata3=auto
SataPortDCapacity
Table 138. SataPortDCapacity
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the total capacity of a hard disk drive. This option is undefined for
removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortDCapacity
SataPortDDriveType
Table 139. SataPortDDriveType
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortDDriveType
SataPortDModel
Table 140. SataPortDModel
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the drive model of the selected device.
SYSCFG 73