CLI Guide

SataPortACapacity
Table 126. SataPortACapacity
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the total capacity of a hard disk drive. This option is undefined for
removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortACapacity
SataPortADriveType
Table 127. SataPortADriveType
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Indicates the type of device attached to the SATA port.
Example:
A:>syscfg --SataPortADriveType
SataPortAModel
Table 128. SataPortAModel
Valid Arguments
● On systems prior to Dell’s YX2X systems: NA
● On Dell’s YX2X and later systems: Read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortAModel
SataPortB or sata1
Table 129. SataPortB or sata1
Valid Arguments
● On systems prior to Dell’s YX2X systems: auto, off
● On Dell’s YX2X and later systems: Auto, Off
Description
Turns the SATA port 1 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata1=auto
sata1=auto
70 SYSCFG