CLI Guide

Table 106. Proc64bit (continued)
Description
Specifies if the installed processor supports 64-bit extensions or not.
Example:
A:>syscfg --Proc64bit
ProcAdjCacheLine or adjcacheprefetch
Table 107. ProcAdjCacheLine or adjcacheprefetch
Valid Arguments
● On systems prior to Dell’s YX2X generation PowerEdge systems: Enable, Disable
● On Dell’s YX2X generation PowerEdge and later systems: Enabled, Disabled
Description
When set to Enabled (default), the system is optimized for applications that
require high utilization of sequential memory access. When set to Disabled, the
system is optimized for applications that require high utilization of random memory
access.
Example:
A:>syscfg --adjcacheprefetch=enable
adjcacheprefetch=enable
ProcBusSpeed
Table 108. ProcBusSpeed
Valid Arguments
● On systems prior to Dell’s YX2X generation PowerEdge systems: NA
● On Dell’s YX2X generation PowerEdge and later systems: Read-only
Description
Displays the bus speed of the processor.
Example:
A:>syscfg --ProcBusSpeed
ProcCores or cpucore
Table 109. ProcCores or cpucore
Valid Arguments
● On systems prior to Dell’s YX2X generation PowerEdge systems: 1, 2, 4, 6, 8, 10,
12, 14, 16, all
● On Dell’s YX2X generation PowerEdge and later systems: single, all, dual, quad, 1,
2, 4, 6, 8, 10, 12, 14, 16, 18
Description
Controls the number of enabled cores in each processor. The default value is set to
the maximum number of cores per processor. The number of cores depends on the
processor. Reading the cpucore that is set to the highest value of number of cores
displays as all.
For example, if six-core CPU is installed, after setting to the highest value, 6, when
you read the cpucore, it displays as all.
64 SYSCFG