CLI Guide

DcuIpPrefetcher
Table 83. DcuIpPrefetcher
Valid Arguments
● On systems prior to YX2X: NA
● On YX2X and later systems: Enabled, Disabled
Description
Enables (default value) or disables DCU IP Prefetcher.
Example:
A:>syscfg --DcuIpPrefetcher=Enabled
DcuIpPrefetcher=Enabled
DcuStreamerPrefetcher or dcustreamerprefetcher
Table 84. DcuStreamerPrefetcher or dcustreamerprefetcher
Valid Arguments
● On systems prior to YX2X: enable, disable
● On YX2X and later systems: Enabled, Disabled
Description
Enables or disables DCU Streamer Prefetcher. This option can be replicated.
Example:
A:>syscfg --dcustreamerprefetcher=enable
dcustreamerprefetcher=enable
LogicalProc or logicproc
Table 85. LogicalProc or logicproc
Valid Arguments
● On systems prior to YX2X: enable, disable
● On YX2X and later systems: Enabled, Disabled
Description
Enables or disables the logical processors of a system. When this option is set
to Enabled (default value), the BIOS reports all logical processors. When set to
Disabled, the BIOS only reports one logical processor per core. Each processor
core supports maximum two logical processors. This option is available on all systems
that support logical processing (Hyperthreading).
This option can be replicated.
Example:
A:>syscfg --logicproc=enable
logicproc=enable
Proc1Brand
Table 86. Proc1Brand
Valid Arguments
● On systems prior toYX2X: NA
● On YX2X and later systems: read-only
58 SYSCFG