CLI Guide

UsbPorts or usbports
Table 45. UsbPorts or usbports
Valid Arguments
● On systems prior to YX2X: enable, enablebackonly, disable
● On YX2X and later systems: AllOn, OnlyBackPortsOn, AllOff
Description
Enables or disables USB ports. When set to enable, it enables all user accessible
USB ports. When set to enablebackonlyor OnlyBackPortsOn, the front user-
accessible ports are disabled. When set to disable or AllOff, both front and back
user accessible ports are disabled. This option can be replicated.
Example:
A:>syscfg --usbports=enable
usbports=enable
MmioAbove4Gb
Table 46. MmioAbove4Gb
Valid Arguments
● On systems prior to YX2X: NA
● On YX2X and later systems: Enabled, Disabled
Description
This field helps in enabling support for PCIe devices that require large amount of
memory. Enable this option only for 64-bit operating systems.
Example:
A:>syscfg --MmioAbove4Gb=Enabled
MmioAbove4Gb=Enabled
Usb3Setting
Table 47. Usb3Setting
Valid Arguments
● On systems prior to YX3X: NA
● On YX3X and later systems: Auto, Enabled, Disabled
Description
Enables or disables the USB 3.0 port.
● Auto — USB ports operate at USB 2.0 speed.
● Enabled — USB ports operates at USB 3.0 speed.
● Disabled — USB 3.0 host controller is disabled and the speed is set to USB
2.0.
Example:
A:>syscfg --Usb3Setting=Auto
Usb3Setting=Auto
SYSCFG 45