CLI Guide

Table 352. RAIDCFG Error Codes and Messages (continued)
Error Code Message
1015 Spanlength is not required for creating a RAID10 virtual disk on this
controller.
1016 Unsupported operation. RAID 6 and RAID 60 virtual disks which are T10 PI
enabled do not support Slow Initialize.
1017 Operation is not supported. The specified controller does not have
encryption capability.
1018 Operation is not supported. Encryption key is not present on the
specified controller.
1019 The specified array disks or hotspares do not have encryption
capability.
1020 The specified controller does not have a locked foreign configuration.
1021 Invalid passphrase.
1022 Input values for secureflag and sf are 1 and 0.
1023 Unsupported operation. Preserved cache is not present on the controller.
1024 Invalide Key Id
1025 Encryption key is already set for the controller.
1026 Cannot delete the encryption key because secure virtual disk is
present.
1027 The passphrase is invalid or old.
1028 Cannot increase the virtual disk size due to lack of free space or due
to the presence of partial virtual disks on the same set of array disks.
1029 The percentage value of virtual disk size must be in the range 1-100.
1030 Error! Cannot discard the preserved cache. Use '-force' option to
discard the cache.
1031 Cannot create a new virtual disk because preserved cache is present on
the controller. To clear the cache, either import the related virtual
disks or discard the cache.
1032 Unsupported RAID value. The expand virtual disk size operation is
allowed only on RAID-0, RAID-1, RAID-5, and RAID-6.
1033 Unsupported file type. Supported file types are .ini, .log, and .txt.
RACADM Firmware Error Codes And Messages
Table below lists RACADM firmware error codes and messages.
Table 353. RACADM Firmware Error Codes and Messages
Error Code Message
1 UNKNOWN COMMAND.
2 OUTPUT ERROR
3 TOO FEW ARGUMENTS
4 UNKNOWN PARAMETER
5 CAN'T LOCK RESOURCE
6 RESOURCE LOCKED
Messages And Codes 211