CLI Guide

Table 278. idracversion (continued)
Option Sub-option Valid Arguments Description
--majorfwversion
NA
Reports the major firmware revision of
iDRAC.
--minorfwversion
NA
Reports the minor firmware revision of
iDRAC.
A:>syscfg --idracversion
devid=32
devrevision=0
majorfwversion=0
minorfwversion=40
kvmstatusonlcd
Table 279. kvmstatusonlcd
Option Sub-option Valid
Arguments
Description Applicable Systems
--
kvmstatusonlcd
NA
active,
inactive
Configures the Dell Virtual KVM (vKVM)
session status on the LCD.
Example:
A:>syscfg --
kvmstatusonlcd=active
kvmstatusonlcd=active
PowerEdge 11G
systems
lancfgparams
Table 280. lancfgparams
Option Sub-option Valid Arguments Description
lancfgparams or
lcp
Configures and displays LAN configuration
parameters. This option can be replicated.
--ipaddrsrc static, dhcp
Sets the IP address source for the LAN
channel. This sub-option can be replicated.
--ipaddress <ipaddress>
Sets the IP address for the LAN channel. This
sub-option cannot be replicated.
--subnetmask <subnetmask>
Sets the subnet mask for the LAN channel.
This sub-option can be replicated.
--gateway <gateway>
Sets the gateway for the LAN channel. This
sub-option can be replicated.
--commstring <string>
Sets the community string (maximum of 16
printable ASCII characters) used in a platform
event trap (PET). This sub-option can be
replicated.
--destipaddr <ipaddress>
Sets the destination IP address or Fully
Qualified Domain Name (FQDN) for the alert
124 SYSCFG