CLI Guide

Table 220. SYSCFG equivalent RACADM commands (continued)
Group SYSCFG Commands Equivalent RACADM Commands
--SetupPassword BIOS.SysSecurity.SetupPassword
--SysPassword BIOS.SysSecurity.SysPassword
System Power --maxpowercap System.Power.Cap.MaxThreshold
--minpowercap System.Power.Cap.MinThreshold
--capenable System.Power.Cap.Enable
--nmibutton BIOS.SysSecurity.NmiButton
--powerbutton BIOS.SysSecurity.PwrButton
SYSCFG Options On PowerEdge Systems Prior To PowerEdge
YX2X Systems
The following are the valid options and arguments supported on PowerEdge systems earlier than PowerEdge YX2X systems.
assignintr
Table 221. assignintr
Valid Arguments standard, distributed
Description Controls the interrupt assignment of PCI devices in the system. This option is set to
standard by default, causing standard interrupt routing that uses interrupt A, B, C,
and D for all PCIe devices. When set to distributed, the interrupt routing is swizzled
at the MCH root ports to minimize sharing of interrupts across all PCIe (and PCI-X in
the Programmable Interrupt Controller (PIC) mode) devices.
Example:
A:>syscfg --assignintr=standard
assignintr=standard
bezelir
Table 222. bezelir
Valid Arguments enable, disable
Description Enables or disables the ESM to monitor and log front bezel intrusion conditions.
Example:
A:>syscfg --bezelir=enable
bezelir=enable
cmosdefaults
Table 223. cmosdefaults
Valid Arguments enable, disable
SYSCFG 103