Users Guide

RPMs

The following table describes all DTK RPMs at mnt/cdrom/RPMs. The syscfg and raidcfg RPMs are also

available in Dell Systems Management Tools and Documentation DVD.

Table 14. RPMs

RPMs Purpose

syscfg Configures server BIOS, BMC/DRAC settings, DTK state settings, PCI device

detection, and so on.

raidcfg Configures all supported RAID controllers.

racadm Configures RAC.

NOTE: Besides the listed RPMs, a set of dependency RPMs are also available at this location.

Documentation

The following table describes documents containing reference information for each DTK utility and

instructions for using DTK utilities and sample scripts. On systems running the Windows operating

system, documentation can be found at \Dell\Docs. On systems running the Linux operating system,

documentation can be found at mnt/cdrom/docs.

Table 15. Documentation

Toolkit Components Purpose

Dell OpenManage Deployment Toolkit

Installation Guide

Contains information about installing and deploying DTK on

supported Dell systems.

README Contains the latest information about supported systems,

known issues, and important notes. On systems running the

Linux operating system, it is located at /mnt/cdrom as well.

Drivers and Dell real mode kernel

Hardware application programing interface (HAPI) drivers are essential for DTK tools to work in the

embedded Linux environment. Dell Real Mode Kernel (DRMK) contains the mbr file necessary to create a

bootable Dell Utility Partition.