Users Guide

Sample scripts for deployment on Windows system
The following table lists Windows sample scripts necessary to perform a scripted deployment. The
sample scripts for Windows are located at Toolkit\Template\Scripts.
NOTE: All DTK scripts are provided as examples only. The batch scripts and configuration files must
be modified to reflect the unique information for each deployed system.
Table 12. Sample Scripts For Deployment on Windows System
Toolkit Components Purpose
createup.cfg This file is used by UPINIT.BAT.
diskpartclr.cfg Used by PARTCFG.BAT to clear the partitions on
the selected disks.
diskpartos.cfg Used by PARTCFG.BAT to create deployment
partition to install the operating system.
LISTUP.CFG This file is used by UPINIT.BAT.
MOUNTUP.CFG This file is used by UPINIT.BAT.
UMOUNTUP.CFG This file is used by UPINIT.BAT.
DTKRUNALL.BAT Applies BIOS, BMC, RAC, and RAID settings saved
in the files to the current system.
ERRHNDL.BAT Handles errors returned in DTK scripts.
PARTCFG.BAT Creates and populates the Dell utility partition and
creates the operating system partition on a
specified hard drive. The script cleans out all
existing partitions on your system before creating
and populating the partition.
RACCAP.BAT Captures Remote Access Controller (RAC) settings
to a file for DRAC 4 remote access controllers.
RACREP.BAT Applies (replicates) the RAC settings saved in a file
to the target system.
RAIDCAP.BAT Captures the RAID settings and saves them to a
file.
RAIDCFG.BAT Configures the selected RAID controllers on the
system.
RAIDREP.BAT Applies (replicates) RAID settings saved in a file to
the target system.
SYSCAP.BAT Captures BIOS and BMC configuration settings and
saves them to a file.
31