Users Guide

Toolkit Components Purpose
syscfg.exe
• Reports and configures
– BIOS settings and options
– BMC settings and options
– RAC 5 settings and options
– IDRAC settings and options
• Maintains system state between reboots.
• Reports hardware devices and other system-related information.
sysdrmk.exe
Used by UPINIT.BAT to patch the boot sector and Master Boot Record
(MBR).
config.ini
Configuration file used by raidcfg.exe.
CAUTION: Do not edit this file. Incorrect edits might cause
raidcfg.exe to fail.
stsvc.ini
Configuration file used by raidcfg.exe.
CAUTION: Do not edit this file. Incorrect edits might cause
raidcfg.exe to fail.
sys.ini
Configuration file used by DTK for deployment.
IDRAC
Configures iDRAC 6.
NOTE: This feature may not be supported on all systems.
IDRAC7
Configures iDRAC 7.
NOTE: This feature may not be supported on all systems.
RAC 4
Configures Dell Remote Access Controller (DRAC) 4/P and DRAC 4/I.
RAC 5
Configures DRAC 5/iDRAC.
pci.ids
Reports PCI devices when used with syscfg.exe.
disclaimer.txt
Displays the disclaimer for the tools.
RaidcfgErrorCodes.txt
Lists the error codes and messages for the raidcfg.exe tool.
SyscfgErrorCodes.txt
Lists the error codes and messages for the syscfg.exe tool.
CONVERTER
Has the utility dtktoracadm.exe to convert the SYSCFG scripts to
equivalent RACADM scripts. The file is located in Toolkit\Tools
\CONVERTER.
dtktoracadm_dict.map
Displays the list of equivalent converted SYSCFG commands to
RACADM commands.
25