Dell Openmanage Deployment Toolkit 5.
Release Type and Definition Deployment ToolKit The Dell OpenManage Deployment Toolkit (DTK) includes a set of utilities, scripts, and sample configuration files that to deploy and your Dell system. You can use DTK to build script-based and RPMbased installation for deploying large number of systems on a preoperating system environment in a reliable way, without changing their current deployment processes.
• A workstation with the following capabilities: • A writable CD/DVD drive and CD/DVD writing software • Network access • A target system with a CD/DVD drive if you are performing a local deployment or network access if you are performing a network deployment. • All Deployment Toolkit utilities, sample scripts, and sample configuration files. • All required Windows PE drivers, operating system drivers, and the Dell utility partition image file.
Emulex OneConnect OCm14102B-N5-D 2-port 10GbE Mezz NIC Emulex OneConnect OCm14102B-N6-D 2-port 10GbE bNDC NIC Mellanox ConnectX-3 Pro Dual Port 10 GbE SFP+ PCIE Adapter Mellanox ConnectX-3 Pro Dual Port 40 GbE QSFP+ Adapter Mellanox ConnectX-3 Pro Dual Port 10 GbE KR Mezzanine Adapter Important Notes This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).
• Use the slots 0-3 of the system to create a boot VD or assigning hot spare (dedicated or global) on Dell PERC S130 controller. If you use any other slots, the system encounters issues during wake up from hibernation. Known Issues SYSCFG Issues • In DRAC 5, the --virtualmedia and --vflash options do not work if there is an active virtual media session. Disconnect the virtual media using the DRAC GUI. Log in to DRAC. Click Media > Virtual Media > Disconnect.
Windows PE Issues • Running partcfg.bat may fail when virtual media is enabled. For the hard disk, partcfg.bat uses the driver letter "c:". When virtual media is enabled, sometimes, the virtual device gets assigned with the drive letter "c:" And, partcfg.bat execution fails. To run partcfg.bat successfully, either disable the virtual media or use the diskpart command to assign a free driver letter for partcfg.bat. • Windows PE 3.0 and 4.0 for 64-bit do not support racadm.exe for DRAC 4.
Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Go to dell.com/contactdell. Copyright © 2015 Dell Inc. All rights reserved.
