Reference Guide

Applicable Systems PowerEdge 12G and later systems

--AesNi

Valid Arguments

• On systems prior to 12G: NA

• On 12G and later systems: Enabled, Disabled

Description

Displays the current status of Intel Processor AES-NI feature.

Example:

A:>syscfg --AesNi=Enabled

AesNi=Enabled

Applicable Systems PowerEdge 12G and later systems

--IntelTxt/--inteltxt

Valid Arguments

• On systems prior to 12G: enable, disable

• On 12G and later systems: On, Off

Description

Turns the Trusted Execution Technology on or off. To enable Intel

TXT, VT must be enabled, and the TPM must be enabled with pre-

boot measurements and activated.

Example:

A:>syscfg --inteltxt=enable

inteltxt=enable

NOTE: To enable the Intel TXT option in a supported processor,

make sure that the:

• Virtualization technology in Processor setting is enabled.

• TPM module is installed and initialed as OK by BIOS.

• TPM security in System security is set to on with pre-boot

measurements.

• User password is not set.

Applicable Systems

All PowerEdge 11G and later systems with Intel processors.

--NmiButton/--nmibutton

Valid Arguments

• On systems prior to 12G: enable, disable

• On 12G and later systems: Enabled, Disabled

Description

Enables or disables the Non-Maskable Interrupt (NMI) button on the

front panel. The NMI button can be used to alert the operating

system in certain cases.

NOTE: This option configures Baseboard Management

Controller (BMC) and Remote Access Controller (RAC) settings.