Reference Guide

--MemRefreshRate

Valid Arguments

• On systems prior to 12G: NA

• On 12G and later systems: 1x, 2x

Description

Sets the Memory Refresh Rate as 1x or 2x

Example:

A:>syscfg --MemRefreshRate=1x

MemRefreshRate=1x

Applicable Systems PowerEdge 12G and later systems.

--MemVolt

Valid Arguments

• On systems prior to 12G: NA

• On 12G and later systems: AutoVolt, Volt15V, Volt135V

NOTE: Volt15V represents 1.5 Volt and Volt135V represents

1.35 Volt.

Description

Sets the DIMM voltage selection.

Example:

A:>syscfg --MemVolt=AutoVolt

MemVolt=AutoVolt

Applicable Systems PowerEdge 12G and later systems.

--MonitorMwait

Valid Arguments

• On systems prior to 12G: NA

• On 12G and later systems: Enabled, Disabled

Description

Enables or disables Monitor/Mwait instructions. You can disable

Monitor/Mwait only when C state is disabled in Custom mode.

Example:

A:>syscfg --MonitorMwait=Enabled

MonitorMwait=Enabled

Applicable Systems PowerEdge 12G and later systems.

--PowerSaver

Valid Arguments

• On systems prior to 13G: NA