Reference Guide

--SataPortI/--sata7
Valid Arguments
• On systems prior to 12G: auto, off
• On 12G and later systems: Off, Auto
Description
Turns the SATA port 7 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata7=auto
sata7=auto
Applicable Systems All PowerEdge systems.
--SataPortICapacity*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the total capacity of a hard-disk drive. This option is
undefined for removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortICapacity
Applicable Systems PowerEdge 12G and later systems
--SataPortIDriveType*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortIDriveType
Applicable Systems PowerEdge 12G and later systems
--SataPortIModel*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortHModel
Applicable Systems PowerEdge 12G and later systems.
85