Reference Guide

--SataPortG/--sata6
Valid Arguments
• On systems prior to 12G: auto, off
• On 12G and later systems: Off, Auto
Description
Turns the SATA port 6 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata6=auto
sata6=auto
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--SataPortGCapacity*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the total capacity of a hard-disk drive. This option is
undefined for removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortGCapacity
Applicable Systems PowerEdge 12G and later systems.
--SataPortGDriveType*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortGDriveType
Applicable Systems PowerEdge 12G and later systems
--SataPortGModel*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortGModel
Applicable Systems PowerEdge 12G and later systems.
83