Reference Guide

• On 12G and later systems: Off, Auto
Description
Sets the drive type of the selected device to off or auto This option
can be replicated.
Example:
A:>syscfg --sata0=auto
sata0=auto
Applicable Systems All PowerEdge systems
--SataPortACapacity*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the total capacity of a hard-disk drive. This option is
undefined for removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortACapacity
Applicable Systems PowerEdge 12G and later systems
--SataPortADriveType*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Indicates the type of device attached to the SATA port.
Example:
A:>syscfg --SataPortADriveType
Applicable Systems PowerEdge 12G and later systems
--SataPortAModel*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortAModel
Applicable Systems PowerEdge 12G and later systems
77