Reference Guide

Group Option on 12G and
Later systems
Option on Systems
Prior to 12G
Systems
Equivalent RACADM Option
--
UefiVariableAccess
N/A N/A
--SecureBoot
NOTE: The
option is
supported only
on Dell
PowerEdge 13G
and later
systems.
N/A
BIOS.SysSecurity.SecureBoot
--SecureBootPolicy
NOTE: The
option is
supported only
on Dell
PowerEdge 13G
and later
systems.
N/A N/A
UEFI Boot Settings --UefiBootSeq N/A BIOS.BiosBootSettings.UefiBootSeq
BIOS Option Settings
You can manage the BIOS start settings using the options in this group.
--BootSeq/--bootseq
Valid Arguments
• On systems prior to 12G: numerical list separated by commas or
list of device names separated by commas
• On 12G and later systems: list of device names separated by
commas
Description
Enables, disables, and orders the devices in a boot order list. Only the
devices present on the system are listed in the boot sequence.
NOTE: Only the devices listed in the bootseq are enabled.
Without an argument, this option prints the boot order list. The
argument must be formatted as a comma-separated numerical list
with no spaces. The list must be within the bounds of the current
boot list, that is, the low and high numbers must match, and the
same number of entries must be supplied. Systems that use a
numerical list for boot order cannot be replicated.
Some systems also allow the boot order to be expressed as a list of
device names. Device names are formatted as a
name.location.instance string, where name is the name of the device,
41