Reference Guide

• On 13G and later systems: Enabled, Disabled

Description

Enables or disables the power saving Dell Active Power Controller

(DAPC) algorithm.

Example:

A:>syscfg --PowerSaver=Enabled

PowerSaver=Enabled

Applicable Systems PowerEdge 13G and later systems

--ProcC1E/--cpucle

Valid Arguments

• On systems prior to 12G: enable, disable

• On 12G and later systems: Enabled, Disabled

Description

Enables or disables C1-E. By default, it is enabled. This option can be

replicated.

Example:

A:>syscfg --cpucle=enable

cpucle=enable

Applicable Systems PowerEdge 11G and later systems

--ProcCStates/--cstates

Valid Arguments

• On systems prior to 12G

: enable, disable

• On 12G and later systems

: Enabled, Disabled

Description Enables or disables the power c states of the processor. When

enabled, the processor can operate in all available power states.

A:>syscfg --cstates=enable

cstates=enable

Applicable Systems PowerEdge 11G and later systems

--ProcPwrPerf/--cpupowermode

Valid Arguments

• On systems prior to 12G: min, max, osdbpm, systemdbpm

• On 12G and later systems: MaxPerf, MinPwr, SysDbpm, OsDbpm

Description

Sets CPU Power Management to maximum performance, operating

system DBPM, or System DBPM (DAPC).

NOTE: The cpupowermode option is a sub-option of Power.