Reference Guide

Example:

A:>syscfg --OneTimeHddSeqDev= 2,3,4,5,1,6

The following devices are set in the boot sequence:

Device 2:* usbcdrom.slot.1- USB CD-ROM device

Device 3:* virtualcd.slot.1 – VIRTUAL CDROM

Device 4:* hdd.emb.0 -Hard drive C:

Device 5:* nic.emb.1 - MBA v2.5.12 Slot 0500

Device 1:* virtualfloppy.slot.1 - VIRTUAL FLOPPY

Device 6:* usbfloppy.slot.1 - USB Floppy device

NOTE: The asterisk indicates that the device is enabled in the

BIOS.

Applicable Systems

PowerEdge 12G and later systems.

--OneTimeUefiBootSeqDev

Valid Arguments

• On systems prior to 12G: NA

• On 12G and later systems: numerical list separated by commas or

list of device names separated by commas

Description

Determines the one-time boot device when the One-Time Boot

Device List is set to UEFI Boot Sequence Device. If Boot Mode is set

to BIOS, the system temporarily switches the Boot Mode to UEFI

when attempting a one-time boot to the device.