Reference Guide

-- InSystemCharacterization
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: FastBoot, OptimizedBoot, Disabled
Description
In-System Characterization (ISC) runs during power-on self-test
(POST) on detecting relevant changes in the system configuration to
optimize power and performance. ISC takes about 20 seconds to
run, and a system restart is required to apply the system
configuration changes. The FastBoot option runs ISC and continues
without applying ISC results until the next sytem restart . The
OptimizedBoot option runs ISC and forces an immediate system
restart to apply the results. If set to
Disabled, ISC does not run.
Example:
A:>syscfg --InSystemCharacterization=FastBoot
InSystemCharacterization=FastBoot
--ReportKbdErr/--rptkeyerr
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Report, Noreport
Description
Enables or disables the BIOS to report keyboard errors during POST.
This option can be replicated.
Example:
A:>syscfg --rptkeyerr=disable
rptkeyerr=disable
Applicable Systems All PowerEdge systems
One-Time Boot
You can manage the one time boot settings using the options in this group.
--OneTimeBootMode
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Disabled, OneTimeBootSeq,
OneTimeHddSeq, OneTimeUefiBoot Seq, OneTimeCustomB
ootSeqStr, OneTimeCustomH ddSeqStr, OneTimeCustomU
efiBootSeqStr
Description
Allows to set the one-time boot sequence..
Example:
A:>syscfg --OneTimeBootMode=Disabled
OneTimeBootMode=Disabled
62