Reference Guide

Error Code Message
55 Virtual disk locked.
56 Drive in use.
57 Reached maximum physical size.
58 Reached maximum count of virtual disks.
59 There is not enough free space on the array disk(s) to allow
the operation to complete; the size of the virtual disk is too
large; or communication to the array disk(s) has been lost.
60 Select the array disks that are part of a similar type of
virtual disk (T10 protection and encryption capability) or the
array disks that are not part of any virtual disks.
61 Invalid Parameter
62 Failed drive cannot be added.
63 The controller cannot support the number of array disks that
you have selected. Choose a smaller number.
64 Delete virtual disk failed. Controller busy.
65 Delete virtual disk failed.
66 Create virtual disk failed.
67 Create virtual disk failed. Controller busy.
68 Create virtual disk failed. Failed to map virtual disk to
operating system disk.
69 Create virtual disk failed. Failed to map virtual disk to
operating system disk.
70 Virtual disk initialization failed.
71 Virtual disk initialization failed. Controller busy.
72 Virtual disk reconstruction failed. Controller busy.
73 Virtual disk resynching failed. Controller busy.
74 Flush Virtual disk's cache failed on controller.
75 Virtual disk partition specified not found.
76 Unsupported cache policy value.
77 Unsupported write policy value.
78 Unsupported read policy value.
79 Cancel initialization on virtual disk failed.
80 Cancel reconstruction on virtual disk failed.
222