Reference Guide

Error Code Message
212 Unsupported file name extension.Supported file name extensions
are .ini, .log, .bat, .ids, .lst, and .txt.
Failures And Solutions
The following table lists the common SYSCFG failures and their solution.
Table 50. SYSCFG Failures and Solutions
Failure Messages Solutions
Generic failure. Indicates iDRAC is in bad state. Reboot iDRAC.
New value not valid. Make sure the changed value is valid.
Cannot disable this
orderedList’s entries.
BIOS does not support enabling or disabling of a particular boot order
object.
System busy, try again later. Retry as iDRAC is busy with internal processing.
Unable to connect IDRAC data
manager.
Start data manager service using srvadmin_services (specific to
Linux).
System Services and/or CSIOR
disabled.
Enable CSIOR from <F2> screen.
UPINIT Common Error Codes And Messages
The UPINIT utility checks your commands for correct syntax. When you enter a command, a message is
displayed stating the results of the command.
Failure Messages
The UPINIT utility failure messages provide error codes to help diagnose why some commands do not
succeed. Table below lists error codes and messages common to Linux and Microsoft Windows PE
environments.
Table 51. UPINIT Common Error Codes and Messages
Error Code Message
0 Dell Utility Partition created successfully.
1 Error: Disk ID not specified.
2 Error: SIZE not specified.
3 Error: Utility Partition Image file not specified.
4 Error: DRMK Path not specified.
5 Error: Dell Utility Partition already exits. Please use --
overwrite option to upgrade or overwrite.
218