Reference Guide

Configuring Array Disk As RAID
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for configuring
the array disk as RAID.
Table 34. Configuring Array Disk as RAID
Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
-ad -ac=ctr -
ad|-pd=
ch:targ:encl -
c=id
or
vdisk
action=convert
toraid adisk|
pdisk=channel:
target:enclosu
re
controllerid=i
d
NA NA
Configures the array disk as RAID.
Example:
A:>raidcfg -ad -ac=ctr -ad=0:1
-c=2
-ad -ac=ctnr -
ad|-pd=
ch:targ:encl -
c=id
or
vdisk
action=convert
tononraid
adisk|
pdisk=channel:
target:enclosu
re
controllerid=i
d
NA NA
Configures the array disk as JBOD.
Example:
A:>raidcfg -ad -ac=ctnr -
ad=0:1 -c=2
Configuring Physical Disk State
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for configuring
the physical disk state to online or offline.
CAUTION: Setting a physical disk online or offline may result in data loss. Either complete an
automatic rebuild of the physical disk or initiate a consistency check of the virtual disk after an
online task completes.
193