Reference Guide

Mandatory
Options and
Arguments
Optional
Parameters
Valid Parameters
Arguments
Description
createvdisk
controllerid=
id adisk=
channel:target
: lun,...
channel:target
: lun,... [or
channel:target
:
enclosure,...]
–
RAID 0: 100 MB
– RAID 1: 100 MB
– RAID 5: 100 MB
• For PERC 6 controllers:
– RAID 0: 100 MB
– RAID 1: 100 MB
– RAID 5: 100 MB
– RAID 6: 100 MB
– RAID 60: 100 MB
• For PERC 7, PERC 8, and PERC 9
controllers:
– RAID 0: 100 MB
– RAID 1: 100 MB
– RAID 5: 100 MB
– RAID 6: 100 MB
– RAID 10: 100 MB
– RAID 50: 100 MB
– RAID 60: 100 MB
• Software RAID controllers:
– RAID 0: 100 MB
– RAID 1: 100 MB
– RAID 5: 100 MB
– RAID 10: 100 MB
NOTE: If this option is not provided,
RAIDCFG determines the maximum
virtual disk size and creates it.
-ctrl -ac=cvd
-c=id -ad=
ch:targ,ch:tar
g, ... [or
ch:targ:encl,.
..]
or
controller
action=
createvdisk
controllerid=
id adisk=
channel:target
: lun,...
channel:target
: lun,... [or
channel:target
-vdpi or
vdiskprotectio
ninfo
0,1
Creates a virtual disk with the T10
Protection Information (PI) feature
enabled.
NOTE: This option is supported
only on PERC 9 controllers.
Example:
A:>raidcfg -ctrl -ac=cvd
-c=2
-ad=1:4,1:8 -vdpi=1
RAIDCFG Command successful!
174