Reference Guide

Option Sub-option Valid Arguments Description
--solbitrate 9600, 19200
Sets the serial channel
communication bit rate (in bps) with
the BMC when SOL is activated. This
option can be replicated.
NOTE: The arguments for
solbitrate vary with various
Dell systems. If an argument
valid for a particular Dell system
is entered for another system,
the Parameter out of
range
error is displayed.
Example 1 (to display the current
SOL configuration):
A:>syscfg solcfgparams
solcfgparams
solenable=enable
solprivlevel=administrator
solcharaccum interval=25
solcharsend threshold=25
solbitrate=9600
Example 2 (to set the SOL
configuration parameters):
A:>syscfg solcfgparams
--solenable=disable
--solprivlevel=administrator
--solcharaccum interval=25
--solcharsend threshold=100
--solbitrate=9600
solcfgparams
solenable=disable
solprivlevel=administrator
solcharaccum interval=25
solcharsend threshold=100
solbitrate=9600
ssninfo
Option Sub-option Valid Arguments Description
ssninfo
Displays information about the number of
possible active sessions and the number
of currently active sessions on all
channels on the BMC. This option cannot
be replicated.
NOTE: All PowerEdge systems prior
to PowerEdge 12G systems.
--maxactivessns
NA Displays the maximum possible active
BMC sessions. This sub-option cannot be
replicated.
145