Reference Guide

SYSCFG Options On PowerEdge Systems Prior To PowerEdge 12G Systems
The following are the valid options and arguments supported on PowerEdge systems earlier than
PowerEdge 12G systems.
--assignintr
Valid Arguments standard, distributed
Description Controls the interrupt assignment of PCI devices in the system. This
option is set to standard by default, causing standard interrupt
routing that uses interrupt A, B, C, and D for all PCIe devices. When
set to distributed, the interrupt routing is swizzled at the MCH root
ports to minimize sharing of interrupts across all PCIe (and PCI-X in
the Programmable Interrupt Controller (PIC) mode) devices.
Example:
A:>syscfg --assignintr=standard
assignintr=standard
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--bezelir
Valid Arguments
enable, disable
Description Enables or disables the ESM to monitor and log front bezel intrusion
conditions.
Example:
A:>syscfg --bezelir=enable
bezelir=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--cmosdefaults
Valid Arguments
enable, disable
Description
Enables or disables the request for a default CMOS value during the
next reboot.
A:>syscfg --cmosdefaults=enable
cmosdefaults=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
108