Users Guide

Known issues and frequently asked

questions

This section describes known issues with the Deployment Toolkit (DTK) utilities and scripts, including

answers to some frequently asked questions.

Known issues

The following issues are organized by DTK utility or other function.

General issues

• Virtual disk creation and/or deletion takes a long time on Microsoft Windows PE.

RAIDCFG issues

• Due to a rounding limitation for RAID 0, RAID 1, and RAID 5, when creating a virtual disk, RAIDCFG can

accept a disk size that is 1 MB greater than the maximum allowable virtual disk size limit. However,

RAIDCFG creates the maximum virtual disk size and does not display an error. If you want to use the

maximum allowable virtual disk size, it is recommended that you do not provide the size in the CLI

and let RAIDCFG calculate the size for the RAID type.

Windows PE installation issues

• If virtual flash is enabled and does not contain a valid image (for example, if the virtual flash contains a

corrupt or random image), you may not be able to install Windows Server 2008 locally or remotely.

To fix this issue, install a valid image on virtual flash or disable virtual flash if it is not used during the

installation procedure.

Embedded Linux installation issues

• If internal SD card is present in the server, you may not be able to install the operating system using

default partition. To fix this, remove the SD card from the server.

Frequently asked questions

The following questions are organized by DTK utility or other function.

General deployment questions

Q: While running SYSCFG.EXE on a Windows PE image, the SYSCFG.EXE tool silently fails.

A: Ensure that you have built your Windows PE image with the /WMI option. For more details, see

Running The Deployment Scripts.