Users Guide

On systems running Windows:
call Z:\Dell\Toolkit\Template\Scripts\SYSCAP.BAT
On systems running Linux:
/opt/dell/toolkit/template/scripts /syscap.sh
2. Boot the source system into Windows PE or embedded Linux.
The script runs and saves the configuration information in the \Toolkit\Systems\<target system>
directory in Windows and /opt/dell/toolkit/systems/<target system> directory in Linux.
3. Edit the startnet.cmd file (Windows PE image) or start-up script file (embedded Linux image) to
remove the text you added in step 1.
NOTE: The racrep.sh and sysrep.sh have duplicate functions. If you run racrep.sh followed by
sysrep.sh, the latter overwrites the former settings.
Capturing the RAC configuration with the RACCAP or raccap.sh sample
script
If your system has a RAC, you can replicate the RAC configuration from the RAC of a source Dell system
to an identical target Dell system with an identical RAC.
NOTE: For the script to complete successfully, the source system must have access to the network
share that includes the pre-built DTK directory structure.
Running RACCAP.BAT or raccap.sh
To run the RACCAP.BAT or raccap.sh sample script to capture the RAC configuration information in the
raccfg.ini file:
1. Edit the startnet.cmd file (on your Windows PE image) or start-up script file (on your embedded Linux
image) to call the RACCAP.BAT or raccap.sh script after the network share with the pre-built DTK
directory structure is mounted. For example, add:
On systems running Windows:
Z:\Dell\x32\Toolkit\Template\Scripts\RACCAP.BAT Z:\raccfg.ini
On systems running Linux:
/opt/dell/toolkit/template/scripts/raccap.sh
2. Boot the source system into Windows PE or embedded Linux.
The script runs and saves the configuration information in the \Toolkit\Systems\<target system>
directory on systems running Windows and /opt/dell/toolkit/systems/<target system> directory on
systems running Linux.
3. Edit the startnet.cmd file (Windows PE image) or start-up script file (embedded Linux image) to
remove the text you added in step 1.
NOTE: The RAC configuration file is referred to as the .cfg file in the The Integrated Dell
Remote Access Controller 8 (iDRAC8) User's Guide
. See these guides for additional information
about manually creating a RAC configuration file.
NOTE: Do not replicate the RAC IP address when creating a .cfg file. Replicating the RAC IP
address can leave the system inaccessible because multiple systems are configured with the
same IP address.
NOTE: The racrep.sh and sysrep.sh have duplicate functions. If you run racrep.sh followed by
sysrep.sh, the latter overwrites the former settings.
47