Users Guide

Toolkit Components Purpose

pci.ids Used with syscfg to report PCI devices.

racadm Wrapper script, which invokes racadm5, or racadm6 depending on the

Remote Access Controller (RAC) on your system.

racadm5 Configures DRAC 5 RACs.

racadm6 Configures iDRAC 6.

NOTE: This feature may not be supported on all systems.

racadm7 Configures iDRAC 7.

raidcfg Creates and reports RAID information.

RaidcfgErrorCodes.txt Lists the error codes and messages for the raidcfg tool.

stsvc.ini Configuration file used by raidcfg.

syscfg

• Reports and configures BIOS, BMC, and DRAC.

• Maintains the system state between reboots.

• Reports hardware devices and other system-related information.

SyscfgErrorCodes.txt Lists the error codes and messages for the syscfg tool.

sys.ini A .ini file used with syscfg.

UpinitErrorCodes.txt Lists the error codes and messages for upinit.sh.

Sample configuration files for windows

The following table describes examples of Windows configuration files used to perform a scripted

deployment. The Windows files for 32-bit and 64-bit supported systems are located in the following

directories:

• \Dell\x32\Toolkit\Template\Configs

• \Dell\x64\Toolkit\Template\Configs

NOTE: All configuration files are provided as examples only. These sample configuration files must

be edited before they can be used in any deployment tasks.