Users Guide

Toolkit Components Purpose
– BIOS settings and options
– BMC settings and options
– RAC 5 settings and options
– IDRAC settings and options
• Maintains system state between reboots.
• Reports hardware devices and other system-related information.
sysdrmk.exe
Used by UPINIT.BAT to patch the boot sector and Master Boot Record
(MBR).
config.ini
Configuration file used by raidcfg.exe.
CAUTION: Do not edit this file. Incorrect edits might cause
raidcfg.exe to fail.
stsvc.ini
Configuration file used by raidcfg.exe.
CAUTION: Do not edit this file. Incorrect edits might cause
raidcfg.exe to fail.
sys.ini
Configuration file used by DTK for deployment.
IDRAC
Configures iDRAC 6.
NOTE: This feature may not be supported on all systems.
IDRAC7
Configures iDRAC 7.
NOTE: This feature may not be supported on all systems.
RAC 4
Configures Dell Remote Access Controller (DRAC) 4/P and DRAC 4/I.
RAC 5
Configures DRAC 5/iDRAC.
pci.ids
Reports PCI devices when used with syscfg.exe.
disclaimer.txt
Displays the disclaimer for the tools.
RaidcfgErrorCodes.txt
Lists the error codes and messages for the raidcfg.exe tool.
SyscfgErrorCodes.txt
Lists the error codes and messages for the syscfg.exe tool.
System utilities and supported files For Linux
The following table lists the files, located at /opt/dell/toolkit/bin and the supporting libraries located
in /opt/dell/toolkit/lib on systems running the Linux operating system. These are the core tools (utilities)
that perform pre-operating system configuration and deployment tasks. See the Dell OpenManage
Deployment Toolkit Command Line Interface Reference Guide at dell.com/openmanagemanuals for
complete information about the capabilities of each DTK utility.
25