Users Guide

Compute sled to PowerEdge
FD332 setup
Operating
system
installation
support
SYSCFG/RAIDCFG
configuration
support
Description
Compute sled without PERC +
multiple PowerEdge FD332 with a
dual PERC mapped to the
compute sled (joint mode) +
single boot VD
Yes Yes PERC controller with boot VD
must be the first in the boot
order list of the compute sled
BIOS.
Compute sled without PERC +
multiple PowerEdge FD332 with a
dual PERC mapped to the
compute sled (split mode) + single
boot VD
Yes Yes PERC controller with boot VD
must be the first in the boot
order list of the compute sled
BIOS.
Compute sled without PERC +
multiple PowerEdge FD332 with a
single PERC mapped to the
compute sled + single boot VD
Yes Yes PERC controller with boot VD
must be the first in the boot
order list of the compute sled
BIOS.
Compute sled with PERC +
multiple PowerEdge FD332 with a
dual PERC mapped to the
compute sled (joint mode) +
single boot VD
Yes Yes PERC controller with boot VD
must be the first in the boot
order list of the compute sled
BIOS.
Compute sled with PERC +
multiple PowerEdge FD332 with a
dual PERC mapped to the
compute sled (split mode) + single
boot VD
Yes Yes PERC controller with boot VD
must be the first in the boot
order list of the compute sled
BIOS.
Compute sled with PERC +
multiple PowerEdge FD332 with a
single PERC mapped to compute
sled + single boot VD
Yes Yes PERC controller with boot VD
must be the first in the boot
order list of the compute sled
BIOS.
Compute sled with PERC +
PowerEdge FD332 (single/
multiple) with a dual PERC
mapped to the compute sled (joint
mode) + multiple boot VD
No Yes No scenario to install operating
system with multiple boot VD.
Compute sleds (with/without)
PERC + PowerEdge FD332 (single/
multiple) with a dual PERC
mapped to the compute
sleds (split mode) + multiple boot
VD
No Yes No scenario to install operating
system with multiple boot VD.
Compute sled with PERC
+ PowerEdge FD332 (single/
No Yes No scenario to install operating
system with multiple boot VD.
17