Release Notes

 Emulex OCm14102-N6-D DP 10Gb bNDC Ethernet Network Adapter
 Emulex OCm14102-N1-D Dual-port 10Gb PCIe Ethernet Network Adapter
 Emulex OCm14102-N5-D DP 10Gb bMezz Ethernet Network Adapter
 Intel X710 QP 10Gb KR 4x10Gb Network Daughter Card
 Intel I350/X710 2x10Gb BT 2x10Gb SFP+ Network Daughter Card
 Intel X710 4x10GE SFP+/DA FH PCIe Ethernet Network Adapter
 Intel X710 2x10GE SFP+/DA FH PCIe Ethernet Network Adapter
 NOTE: For the list of supported operating systems and Dell servers, see the Dell Systems
Software Support Matrix at dell.com/openmanagemanuals.
Important Notes
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/).
From DTK 4.4.1 onwards, the product carries GNU Bash update packages to fix the Shellshock vulnerability
(CVE-2014-7169 and CVE-2014-6271).
DTK operating system deployment limitation:
DTK does not support operating system deployment, when multiple boot VDs exist on a single controller
or when the server has multiple boot controllers. If multiple boot controllers exist on the server, the boot
VD must be created on any one of the controllers, and the boot VD must be set as first boot device in
system BIOS.
SYSCFG
 Some options may not be present on all systems, which may be due to the BIOS version or
hardware feature set. The usage information generated by running SYSCFG without arguments
shows only those options that are valid for your system.
 The "--devseq" option is present only if you have an available, bootable hard-disk partition. If this
option is present in the configuration file, but not present on your system, you will receive a
usage error.
 It is required to perform a warm reboot after applying the syscfg settings changes on Dell
PowerEdge 12G systems.
 If you perform operations that change the "--redmem" option, reboot your system immediately.
It is applicable to both command line and "--infile" usage.
NOTE: Additionally, the "--redmem" option should not be issued with any other command and
should be immediately followed by a system reboot. This is important when you develop scripts
that can alter the "--redmem" setting.
 For options that use text strings such as username, password, hostname, and community string,
using characters such as <space>, "<," ">," "|," "=" on the command line can be misinterpreted by
the command line parser and may cause errors. To avoid such errors, use only alphanumeric
characters.
 If you set the username using syscfg username option, Serial over LAN (SOL) access for the
corresponding user will be enabled by default. You can disable SOL access for a user using
"syscfg solaction --userid=<userid> --action=disable" command.
 The legacy attribute values enable and disable are also supported for 12G systems for backward
compatibility. In future releases these arguments might be deprecated. Try to use the values
displayed in help message for BIOS options for 12G server.
RAIDCFG
 When creating virtual disks, the chunk (stripe) size is always in KBs. Do not specify any units of measure
for the chunk size.
 When providing multiple physical disks for the "create virtual disk" command, do not separate the disks
with spaces.