Dell Openmanage Deployment Toolkit 5.
Release Type and Definition Deployment ToolKit The Dell OpenManage Deployment Toolkit (DTK) includes a set of utilities, scripts, and sample configuration files that to deploy and your Dell system. You can use DTK to build script-based and RPMbased installation for deploying large number of systems on a preoperating system environment in a reliable way, without changing their current deployment processes.
Working knowledge of Windows Deployment Services (WDS) or any other third-party deployment system or tool for Windows PE. A workstation with the following capabilities: A writable CD/DVD drive and CD/DVD writing software Network access A target system with a CD/DVD drive if you are performing a local deployment or network access if you are performing a network deployment. All Deployment Toolkit utilities, sample scripts, and sample configuration files.
Emulex OCm14102-N6-D DP 10Gb bNDC Ethernet Network Adapter Emulex OCm14102-N1-D Dual-port 10Gb PCIe Ethernet Network Adapter Emulex OCm14102-N5-D DP 10Gb bMezz Ethernet Network Adapter Intel X710 QP 10Gb KR 4x10Gb Network Daughter Card Intel I350/X710 2x10Gb BT 2x10Gb SFP+ Network Daughter Card Intel X710 4x10GE SFP+/DA FH PCIe Ethernet Network Adapter Intel X710 2x10GE SFP+/DA FH PCIe Ethernet Network Adapter NOTE: For the list of supported operating systems and Dell servers,
For example, "-ad=1:4, 1:5" causes an error. The correct way to input multiple physical disks is "ad=1:4,1:5,1:6" or "-ad=1:4:0,1:5:0,1:6:0". If you change the controller mode from SCSI to RAID mode, data loss may occur. Back up any data you require before changing the modes. Use the slots 0-3 of the system to create a boot VD or assigning hot spare (dedicated or global) on Dell PERC S130 controller. If you use any other slots, the system encounters issues during wake up from hibernation.
in the configuration file using the local RACADM command "racadm getconfig -f " do not contain the leading "#" symbol, which indicates that they are read-only. Windows PE Issues Running partcfg.bat may fail when virtual media is enabled. For the hard disk, partcfg.bat uses the driver letter "c:". When virtual media is enabled, sometimes, the virtual device gets assigned with the drive letter "c:" And, partcfg.bat execution fails. To run partcfg.
Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Go to dell.com/contactdell. Copyright © 2015 Dell Inc. All rights reserved.
