Reference Guide

: Enabled, Disabled
Description Enables or disables the power c states of the processor. When
enabled, the processor can operate in all available power states.
A:>syscfg --cstates=enable
cstates=enable
Applicable Systems PowerEdge 11G and later systems
--ProcPwrPerf/--cpupowermode
Valid Arguments
• On systems prior to 12G: min, max, osdbpm, systemdbpm
• On 12G and later systems: MaxPerf, MinPwr, SysDbpm, OsDbpm
Description
Sets CPU Power Management to maximum performance, operating
system DBPM, or System DBPM (DAPC).
NOTE: The cpupowermode option is a sub-option of Power.
Example:
A:>syscfg --ProcPwrPerf=OsDbpm
ProcPwrPerf=OsDbpm
Applicable Systems All PowerEdge systems.
--ProcTurboMode/--turbomode
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables core-based turbo mode. Turbo mode is a feature
on Intel processors that allows one processor core to increase the
frequency by one bin whenever the other core has gone into an idle
state. When enabled, the processor can operate in Turbo Boost
Mode.
Example:
A:>syscfg --turbomode=enable
--turbomode=enable
Applicable Systems PowerEdge 11G and later systems running on Intel processors
--SysProfile/--profile
Valid Arguments
• On systems prior to 12G: maxperformance, osctl, apc, custom
96