Reference Guide

• On 12G and later systems: Enabled, Disabled

Description

Enables or disables Monitor/Mwait instructions. You can disable

Monitor/Mwait only when C state is disabled in Custom mode.

Example:

A:>syscfg --MonitorMwait=Enabled

MonitorMwait=Enabled

Applicable Systems PowerEdge 12G and later systems.

--PowerSaver

Valid Arguments

• On systems prior to 13G: NA

• On 13G and later systems: Enabled, Disabled

Description

Enables or disables the power saving Dell Active Power Controller

(DAPC) algorithm.

Example:

A:>syscfg --PowerSaver=Enabled

PowerSaver=Enabled

Applicable Systems PowerEdge 13G and later systems

--ProcC1E/--cpucle

Valid Arguments

• On systems prior to 12G: enable, disable

• On 12G and later systems: Enabled, Disabled

Description

Enables or disables C1-E. By default, it is enabled. This option can be

replicated.

Example:

A:>syscfg --cpucle=enable

cpucle=enable

Applicable Systems PowerEdge 11G and later systems

--ProcCStates/--cstates

Valid Arguments

• On systems prior to 12G

: enable, disable

• On 12G and later systems