Reference Guide

Applicable Systems PowerEdge 12G and later systems
--SataPortJModel*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortJModel
Applicable Systems PowerEdge 12G and later systems.
--SecurityFreezeLock
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled
Description
Sends the Security Freeze Lock command to the embedded SATA
drives during power-on self-test (POST). The option is applicable
only to ATA and AHCI, and not to RAID.
Example:
A:>syscfg --SecurityFreezeLock=Enabled
SecurityFreezeLock=Enabled
Applicable Systems PowerEdge 12G and later systems
Serial Communication
You can manage the serial port settings using the options in this group.
--ConTermType/--conterm
Valid Arguments
• On systems prior to 12G: vt100, ansi
• On 12G and later systems: Vt100, Vt220, Ansi
Description
Sets the console terminal type. On some systems, vt100 may also set
the terminal type to vt220. This option is available on all supported
systems that support console redirection. This option can be
replicated.
Example:
A:>syscfg --conterm=vt100
conterm=vt100
Applicable Systems All PowerEdge systems
88