Reference Guide

Example:

A:>syscfg --SataPortGModel

Applicable Systems PowerEdge 12G and later systems.

--SataPortH/--sata7

Valid Arguments

• On systems prior to 12G: auto, off

• On 12G and later systems: Off, Auto

Description

Turns the SATA port 7 to auto or off. This option can be replicated.

Example:

A:>syscfg --sata7=auto

sata7=auto

Applicable Systems All PowerEdge systems.

--SataPortHCapacity*

Valid Arguments

• On systems prior to 12G: NA

• On 12G and later systems: read-only

Description

Displays the total capacity of a hard-disk drive. This option is

undefined for removable-media devices such as optical drives.

Example:

A:>syscfg --SataPortHCapacity

Applicable Systems PowerEdge 12G and later systems.

--SataPortHDriveType*

Valid Arguments

• On systems prior to 12G: NA

• On 12G and later systems: read-only

Description

This option indicates type of device attached to this SATA port.

Example:

A:>syscfg --SataPortHDriveType

Applicable Systems PowerEdge 12G and later systems.

--SataPortHModel*

Valid Arguments

• On systems prior to 12G: NA