Reference Guide

• On 12G and later systems: Off, Auto
Description
Turns the SATA port 4 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata4=auto
sata4=auto
Applicable Systems All PowerEdge systems.
--SataPortECapacity*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the total capacity of a hard-disk drive. This option is
undefined for removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortECapacity
Applicable Systems PowerEdge 12G and later systems
--SataPortEDriveType*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortEDriveType
Applicable Systems PowerEdge 12G and later systems
--SataPortEModel*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortEModel
Applicable Systems PowerEdge 12G and later systems
82