Reference Guide

Example:
A:>syscfg --sata3=auto
sata3=auto
Applicable Systems All PowerEdge systems.
--SataPortDCapacity*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the total capacity of a hard-disk drive. This option is
undefined for removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortDCapacity
Applicable Systems Dell PowerEdge 12G and later systems.
--SataPortDDriveType*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortDDriveType
Applicable Systems PowerEdge 12G and later systems.
--SataPortDModel*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortDModel
Applicable Systems Dell PowerEdge 12G and later systems.
--SataPortE/--sata4
Valid Arguments
• On systems prior to 12G: auto, off
81